HydroMetrics GW50™ 1.1A 12v LiFePO4 Battery Charger / Power Supply Unit

Adapted by HydroMetrics for charging the HydroMetrics GW50™ portable sensor 12v LiFePO4 battery pack, this customised Victron Blue Smart 1.1A 12v Battery Charger has a seven-step smart charge algorithm maximises battery health and is able to recover fully discharged (dead) batteries. 

Built-in Bluetooth connects to the Victron Connect App on your smartphone so you can display state of charge, see charge history and fine tune charging parameters which is particularly useful when charging Lithium batteries to their factory specs.

Power Supply mode allows you to run any 12V device directly off the charger without the need for a battery. They are IP65 rated for water and dust ingress.

Input: 240V, Output 6V/12V, Charge rate: 1.1A(high) / 0.5A(low)
7 stage charge algorithm: Test/Bulk/Absorption/Recondition/Float/Storage/Refresh
Charge Voltage
Absorption - Normal: 7.2V | 14.4V, High: 7.35V | 14.7V, Li-Ion: 7.1V | 14.2V
Float - Normal: 6.9V | 13.8V High: 6.9V | 13.8V Li-Ion: Disabled
Storage - Normal: 6.6V | 13.2V High: 6.6V | 13.2V Li-Ion: 6.75V | 13.5V

• Power supply mode gives you the ability to run 12V products at a stable amperage for long periods of time without the use of a battery
• Short circuit protection, overload protection and safety timer protection
• Built-in LEDs and one-button operation sets and shows the charging status and battery condition
• IP65 rating for water and dust ingress
• Bluetooth Connectivity via the Victron Connect App shows charging status as well as a graphical view and historical usage statistics for the past 40 charge cycles, and expert settings can be set for optimum charging
• App Download: AppStore + Google Playstore
• Suitable for Lead Acid, AGM, Gel and Lithium batteries 4Ah to 32Ah
• Standby power consumption < 0.5W
• Operating temperature range: -30°C to +50°C
• Automatic compensation for high or low temperature
• Supplied with a 1.5m power lead